General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here...

1983 prk ave actuator vales

Thread Tools
 
Search this Thread
 
  #11  
Old 03-18-2011, 12:58 PM
hanky's Avatar
Senior Member
Join Date: Sep 2010
Posts: 1,225
Default

Have you had a chance to try this place?
starkwrecking@yahoo.com
 
  #12  
Old 03-19-2011, 08:44 AM
wizzard1222's Avatar
Junior Member
Join Date: Mar 2011
Posts: 19
Default I'll file them for future usage...where are they located...?

Hard to find parts will possibly require a s&h factor...

Since we have a fairly common vehicle & many bone-yards in my larger metro area....I can avoid the s&h as well as any delays waiting for the delay. Many of my local yards will pull a part as well...some only operate as 'pull-to-order'...no roaming the yard...

I have used car-parts.com for some Audi parts since those parts are not usually available as spares in most local yards...the salvage base cars are fairly expensive...past what most local yards want to deal w/for their method of operation....
 
  #13  
Old 03-19-2011, 10:29 AM
hanky's Avatar
Senior Member
Join Date: Sep 2010
Posts: 1,225
Default

The ad appeared on this Buick site a couple of weeks ago.
I believe they're located in Miamisburg , Ohio.

I have been unsuccessful attempting to locate the parts for joseph 44 , so far.
I have come across many of his inquires on various Buick parts sites though.

I am curious as to just what may be the problem with the control head for the Park Ave. Depending on what the problem is, sometimes a good electronic tech may be able to replace the defective component .
 
  #14  
Old 03-19-2011, 03:06 PM
joseph44's Avatar
Junior Member
Thread Starter
Join Date: Mar 2010
Posts: 7
Default actuator doors/valves and touch climate control panel

Thanks hanky for the heads up I just e-mailed the person you gave me in my area of florida i don't even know who to get to check out the system. Thanks again as soon as I get my proportioning vavlve on and upper/lower balljoints and new brake hoses on I will persue my heating system. Thanks again for the help hanky and have a great wk !!!
 
  #15  
Old 03-19-2011, 05:00 PM
hanky's Avatar
Senior Member
Join Date: Sep 2010
Posts: 1,225
Default

I haven't given up yet, will continue checking the yards up in my area.
 
  #16  
Old 03-20-2011, 09:12 AM
wizzard1222's Avatar
Junior Member
Join Date: Mar 2011
Posts: 19
Default Hanky's thoughts are right-on....

I assume that Joseph44 wants to save money &/or just do it himself...if possible...

Since the original part(s) can not be fixed by Joseph44...he is seeking a replacement...so the next best suggestions as Hanky has made...& Joseph44 has tried...seek it himself in his local yards....but since it's an aging vehicle...1983...it will become even harder to find.

I think Joseph44 could contact his local yard to 'search' for his parts...

I have seen several national search sites for salvage yards but don't have on to link @ this moment....I'll keep it in mind....I'll try the car-parts.com link I posted recently to see if I can find the '83' prk ave actuator valves....
 

Last edited by wizzard1222; 03-20-2011 at 09:13 AM. Reason: punt/spelling
  #17  
Old 03-20-2011, 09:29 AM
wizzard1222's Avatar
Junior Member
Join Date: Mar 2011
Posts: 19
Default Joseph44...need more info. from your manuals....

Any mention in the manuals & your personal knowledge as to the model years that the Park Ave. had this exact actuator valve system....Like maybe 1981 thru 1985...etc.

I just did a search on car-parts.com w/years 1980 thru 1985 and found 5 yards w/prices, condition & description for "COMPLETE ELECTRONIC TEMP. CONTROL"...

Even though the search description wasn't heater actuator valves...it's close... These & other yards are willing to pick your parts....I'm sure a telephone call to them will give them a better description-location on the 1983 for them to locate it for you....of course they will have to have or had the base 1983 Park Ave. in their yard.

I just tried to leave my search result link...but it didn't work...just the webpage....

Anyway...try it...it may help find your part quicker...

 
  #18  
Old 03-21-2011, 01:54 PM
joseph44's Avatar
Junior Member
Thread Starter
Join Date: Mar 2010
Posts: 7
Default control head/actuator valves

Thanks for the help wizzard1222 I will give the site a shot and see what happens. Thanks tou you and everyone for the help. Everyone have a great wk !!!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DIYallthetime
LeSabre
0
08-29-2013 06:40 PM
schzjoe
Electra/Park Avenue
0
03-15-2013 01:53 PM
moparlouie
Electra/Park Avenue
1
02-12-2011 07:49 AM
tom34diy
LeSabre
1
05-29-2007 05:24 AM
jrasche2003
Electra/Park Avenue
0
04-03-2007 02:12 PM



Quick Reply: 1983 prk ave actuator vales



All times are GMT -5. The time now is 04:58 AM.