General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here...

sqealing noise need help?

Thread Tools
 
Search this Thread
 
Old Aug 13, 2005 | 08:45 PM
  #1  
ketchrace's Avatar
Thread Starter
|
Junior Member
Joined: Aug 2005
Posts: 4
From: United States
Default

I just installed a new 3.8 engine from a junk yard with 700 mile on it and have a real strange sqealing noise almost like a rollerbearing or belt squeal, which I have done several checks such as removing belt to see if any tension pully or alt or water pump ect. making the noise but still continues. I have gotten under engine and noise sounds like it is coming from knock sensor area or buy ac compressor or the center of the engine block,this is where it is the loudest. I now a bit about motors and this is the strangest thing I have ever heard the engine runs great have put 700 more miles on it before this started, it only happens when engine is warmed up to operating temp and fades in and out at above 1000 rpm, trans is also been rebuilt at GM dealer under warranty. This isa head scratcher. Please help I am going crazy with this??? I just changed harmonic balancer as well still making same noise.
 
Old Oct 22, 2005 | 12:18 AM
  #2  
Harley's Avatar
Member
Joined: May 2005
Posts: 46
From: Canada
Default



Strange, so you are sure it's not any belts, the way I check, is hose them down with WD40 it will cause the belt to slip not turn the pullys untill the friction of slipping burns the WD off, usualt 20 secconds or so. if it's not belts, then I'd hate to think of whatelse it could be. maybe your crank berings? Does it happen at idle or in gear?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
soulbazz
Riviera
3
Aug 17, 2007 08:47 PM
djadkins
General Tech Help
2
Aug 28, 2006 02:29 PM
gtrick
Electra/Park Avenue
9
Aug 17, 2006 01:31 PM
gtrick
General Tech Help
3
Feb 3, 2006 02:14 PM
ketchrace
General Tech Help
5
Oct 22, 2005 12:42 AM




All times are GMT -5. The time now is 02:23 AM.