Buick  Forum - Buick Enthusiasts Forums

Buick Forum - Buick Enthusiasts Forums (https://www.buickforum.com/forum/)
-   Regal (1973-2004) (https://www.buickforum.com/forum/regal-1973-2004-23/)
-   -   GM GoodWrench 350 (https://www.buickforum.com/forum/regal-1973-2004-23/gm-goodwrench-350-a-1441/)

imkrister 04-15-2008 06:43 PM

i just bought a new gm goodwrench 350 and am planning to put it into my
85 buick regal. the regal has a th200-4r tranny in it and i was wondering if
the power the 350 will make will be too much for it? i was also wondering if
the rear end could hold up to the power the new engine will make? also if
anyone out there has a goodwrench 350 and has and comments or areas of
concern i should know about?

thanks to all for so much help!!!

samueljackson 04-15-2008 09:06 PM



imop, if you spent good money on aNEW motor, why half-ass it with the old trans? the GR of the th200 wouldnt be that ideal either. id suggest a th 400, 350, or 700. depending on what you want to do with the car, street, strip, etc.


not extremely helpful, butthis may answer some of your questions.


https://www.buickforum.com/forum_pos...=1493&PN=1








what are your plans for induction, and fuel delivery?

imkrister 04-17-2008 02:14 PM

i plan on putting a edelbrock 600cfm performer carb with an adapter plate
and an edelbrock performer air gap manifold


All times are GMT -5. The time now is 08:49 AM.


© 2024 MH Sub I, LLC dba Internet Brands