Regal (1973-2004) Buick's sporty mid-sized sedan

antilock brake sensor

Thread Tools
 
Search this Thread
 
  #1  
Old 03-29-2005, 03:24 PM
smshall's Avatar
Junior Member
Thread Starter
Join Date: Mar 2005
Location: United States
Posts: 3
Default

We were wondering if there were many people with Regals that are having difficulty with the antilock brakes sensors. We have had to replace the left rear once and will have to replace the right wheel sensor. Ours is a 2000, LS model. This is a costly repair and with each wheel containing one we are upset and afraid that this is going to continue with the remaining two wheels.
 
  #2  
Old 03-29-2005, 06:24 PM
Patrick's Avatar
Administrator
Join Date: Mar 2005
Posts: 189
Default

is it part of an enclosed wheel bearing?
 
  #3  
Old 03-30-2005, 12:26 AM
smshall's Avatar
Junior Member
Thread Starter
Join Date: Mar 2005
Location: United States
Posts: 3
Default

Yes they say it is.
 
  #4  
Old 03-30-2005, 04:22 PM
Patrick's Avatar
Administrator
Join Date: Mar 2005
Posts: 189
Default



hmm..what made you take it into the shop in the first place??
 
  #5  
Old 04-04-2005, 06:51 PM
smshall's Avatar
Junior Member
Thread Starter
Join Date: Mar 2005
Location: United States
Posts: 3
Default

The antilock brake lock light along with the traction control light was coming on.
 
  #6  
Old 04-05-2005, 11:19 AM
Patrick's Avatar
Administrator
Join Date: Mar 2005
Posts: 189
Default

hmm...perhaps try a different shop for a second opinion? it seems odd to me that they would all just go bad.
 
  #7  
Old 07-28-2015, 05:49 PM
abe's Avatar
abe
abe is offline
Junior Member
Join Date: Aug 2009
Location: IL
Posts: 5
Default

the rear sensors just press in. Much cheaper repair. The front ones on the other hand are integrated into the wheel bearing assembly. Much more expensive to repair. A good shop will have a meter to hook up and diagnose if the sensor is defective or not. I agree with the former post: get a second opinion because I think your mechanic is just replacing until he/she finds the problem and then you get stuck with the tab.
 
  #8  
Old 07-29-2015, 10:50 AM
bighank's Avatar
Junior Member
Join Date: May 2015
Posts: 6
Default Use a DVM right at the sensor - should be slightly more than 1000 ohms

I had a break in the wire going to the R F wheel. Pulled the codes at Advance Auto for free. Then used a DVM to check resistance and whether the sensor was shorted to ground or open. My sensor read about 1080 ohms. GM value for a good sensor in this hot weather is in the range of 1000 to about 1400 ohms. If sensor appears good check out the wiring. Mine was broken about 3 inches from the body connector. Autozone help and repairs gives you a sorta schematic. Log on and create an ID and print it out. Worst was finding the pinouts for the large ABS connector. Mine has 3 rows of small round pins numbered A! - A11, B1 - B11, and C1 - C11. There are 4 other large square pins, top 2 are +12volts and bottom 2 are ground.
Several TSBs on the cables breaking at places where the cable can move.
Ohm yours out before putting in a new hub. If it is a broken wire replacing the hub is just a waste of time and money and WILL NOT fix the problem.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RSXS34
Suspension
1
01-05-2021 10:42 PM
wizzard1222
LeSabre
8
07-24-2012 01:15 PM
redlove
General Tech Help
3
11-11-2006 08:06 PM
john harker
Electra/Park Avenue
10
07-26-2006 09:41 PM
BigRich
PRIVATE For Sale / Trade Classifieds
0
01-06-2006 10:15 PM



Quick Reply: antilock brake sensor



All times are GMT -5. The time now is 01:21 PM.