supercharger HELP!!!
#2
before you raise the boost you want to make sure your engine is running to its full potential now. if you are unsure of the last tune up, i would suggest new plugs, and wires at the minimum.
after that, you need to scan the pcm and make SURE you have 0 KR (knock retard).
when that is all good, i would suggest a fwi, or a cai of somesort.
then think about raising the boost. you can achieve this by simply putting on a smaller pulley. you can get a press on pulley for about $60. but you may look into the modular pulley systems. more commonly refered to as MPS. those you can easily swap out pulleys with just a few bolts.
for the first pulley drop i would suggest a 3.5 inch. and after that you need to scan again and make sure you still have 0 kr.
Thread
Thread Starter
Forum
Replies
Last Post